Ir para o conteúdo principal
Ajuda

Pentax LX Top Cover (Wind Side) Removal

Editando passo 2 —

Aviso: Você está editando um guia tipo pré-requisito. Todas as alterações que você fizer afetarão todos os 4 guias que incluem este passo.

Tipo de Passo:

Arraste para reorganizar

Gently remove the rubber covering around the shutter speed dial.

Remove three #000 1.6 mm screws.

Remove cover ring.

Installation Notes: After the camera has been fully tested, use a few dabs of contact cement to fix the rubber covering back in place.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.