Alterações no passo nº 1
Edição por Quinn Kennedy —
Edição aprovada por Quinn Kennedy
- Antes
- Depois
- Sem alteração
Linhas do passo
| - | [* black] Insert prying end of plasic opening tool into seam between screen and front pannel. Work across top edge of screen assembly, corner to corner, prying with opening tool. Once top edge is separated, repeat same process on the seams along both sides of screen assembly. There should be audible clicks as the screen separates from the from pannel. |
|---|---|
| + | [* black] Insert prying end of plasic opening tool into the seam between the screen and the front pannel. Work across top edge of screen assembly, corner to corner, prying the screen from the back pannel. |
| + | [* black] Repeat same process on the seams along both sides of screen assembly. |
| + | [* black] There should be several audible clicks as the screen separates from the from pannel. |
| + | [* black] fold the screen and front pannel appart, leaving them connected at the side closest to the keyboard |