Alterações no passo nº 1
Edição por Mark —
Edição aprovada por Kyle Wiens
- Antes
- Depois
- Sem alteração
Linhas do passo
| [* black] Peel back the copper ESD shielding covering the bottom of the motherboard. | |
| [* icon_caution] Do not try to remove the copper shielding, as it is still attached underneath the battery. | |
| + | [* black] If your just replacing the speaker or the micro usb charge port, there is no need to peel back the copper heatsink like in the photo. Save time and simply peel back the bottom corner to expose the speaker connection. Leave the rest of the heatsink shield alone. |