Alterações neste passo
Edição por David Patierno —
- Antes
- Depois
- Sem alteração
Linhas do passo
| [* icon_caution] The front bezel is still attached to the iMac by the microphone cable. | |
| - | [* black] Gently lift the front bezel from its top edge off the rear case. It helps to use your thumbs to push down very gently on the corners of the display |
| + | [* black] Gently lift the front bezel from its top edge off the rear case. It helps to use your thumbs to push down very gently on the corners of the display. |
| [* black] Once the top edge of the front bezel has cleared the rear case, rotate the front bezel toward the stand and lift it off the rear case. | |
| [* icon_reminder] When reinstalling the front bezel, start at the lower edge and make sure it is flush with the rear case before lowering the top edge onto the iMac. |