Alterações no passo nº 2
Edição por Adam O'Camb —
Edição aprovada por Adam O'Camb
- Antes
- Depois
- Sem alteração
Linhas do passo
| [* black] If the fingerprint sensor adhesive is intact, it may be reused, but if damaged at all you should remove the old adhesive and apply replacements. | |
| [* black] After removing the old adhesive, clean the edges of the fingerprint sensor with high concentration isopropyl alcohol (at least 90%), then apply the new adhesive. | |
| - | [* icon_reminder] You may also need to transfer the camera bezel to your new part, if that's the case, follow our [guide|122484|camera bezel replacement guide|stepid=236006]. |
| + | [* icon_reminder] You may also need to transfer the camera bezel to your new part, if that's the case, follow our [guide|122484|camera bezel replacement guide|stepid=236006|new_window=true]. |