Alterações no passo nº 5
Edição por Andrew Bookholt —
- Antes
- Depois
- Sem alteração
Linhas do passo
| [* black] Insert the flat end of a spudger between the SATA data cable and the edge of the hard drive. | |
| [* black] Twist the spudger to separate the SATA data cable from the hard drive. | |
| [* black] Disconnect the SATA data cable from the hard drive. | |
| [* icon_note] Repeat this process for the SATA power cable. | |
| - | [* black] Lift the hard drive out of your iMac. |
| + | [* black] Lift the hard drive out of your iMac, minding the thermal sensor cable that may get caught. |