Alterações no passo nº 1
Edição por Tobias Isakeit —
Edição aprovada por Tobias Isakeit
- Antes
- Depois
- Sem alteração
Linhas do passo
| [* black] Switch off your phone. | |
| [* icon_note] If your screen is cracked you want to cover the front panel with tape to protect yourself from glass shards and get a better grip to lift it. | |
| - | [* black] Use an iOpener to soften the glue on the edge of the display assembly. Concentrate on the sides first and then on the bottom part. |
| + | [* black] [guide|25705|Use an iOpener|new_window=true] to soften the glue on the edge of the display assembly. Concentrate on the sides first and then on the bottom part. |
| [* black] With an iSclack or a suction handle you can lift the display a little bit to get in the gap with an opening pick. | |
| - | [* icon_caution] In the beginning just insert |
| + | [* icon_caution] In the beginning just insert the very tip of the opening pic k and slide along the side to loosen the glue. Leave the top and bottom alone for now. |