Alterações no passo nº 3
Edição por Brett Hartt —
- Antes
- Depois
- Sem alteração
Linhas do passo
| - | [* black] Insert wisdom here. |
|---|---|
| + | [* icon_caution] When working with batteries, you must always remove the negative lead from the battery first, even if the corrosion is only on the positive lead. |
| + | [* black] Using a 10mm hex wrench, loosen the nut on the screw holding the ***negative*** terminal in place. |
| + | [* black] If the corrosion is preventing you from accessing the nut, use a the other end of the wrench or a wire brush to scrape some of the corrosion away. |
| + | [* black] Pull the negative battery cable off of the negative lead. |