Alterações no passo nº 3
Edição por Matt Steensma —
Edição aprovada por Matt Steensma
- Antes
- Depois
- Sem alteração
Linhas do passo
| [* black] Remove the remaining larger ribbons, which are secured by zif connectors. There are two larger ribbons connected to the top of the logic board. To remove these ribbons, use the plastic opening tool to push up on the tap, which will loosen the ribbon. Pull the ribbons away from their respective connections. | |
| + | [* black] Use your fingers to disconnect the blue wire from its connection. |