Alterações no passo nº 1
Edição por Tyler Starr —
Edição aprovada por Tyler Starr
- Antes
- Depois
- Sem alteração
Linhas do passo
| [* black] Starting in the bottom left corner, remove the battery connection with the black and red wires. This connection has a small male connector housed inside of a female connector. To remove, use the plastic opening tool to gently push the male end up and out of the female end. | |
| [* red] Gently pull the ribbon cables out of the 4 ZIF connectors. | |
| - | [* icon_caution] Do not |
| + | [* icon_caution] Do not lift up on the tabs on these ZIF connectors. Lifting these tabs will break the connectors. |