Alterações no passo nº 3
Edição por Kyle Trambley —
Edição aprovada por Kyle Trambley
- Antes
- Depois
- Sem alteração
Linhas do passo
| - | [* black] While still compressing, lift the motor cover and remove the belt completely. |
|---|---|
| + | [* black] Making sure to hold the motor and truck together, lift off the belt casing and take off the belt. |
| + | [* icon_note] Do ***Not*** let go of the motor and truck until the new belt is on and the ++Front hex screw is tightened++ securely. |
| + | [* icon_caution] The springs inside the motor mount will push the motor out of the casing if they are not held together. |