| - | [* black] Partially disconnect the motherboard from the case, leaving one ribbon and both wires near screen hinges still connected to the motherboard. Tilt the motherboard from the opposite side of the screen hinges upwards, to access the back of the motherboard. |
|---|
| - | [* red] Remove four 7/32" screws with a Phillips 1 screwdriver. |
|---|
| - | [* orange] Remove one 4/32" screw with a Phillips 1 screwdriver. |
|---|
| + | [* red] Remove four 7/32" screws with a Phillips 1 screwdriver. |
|---|
| + | [* orange] Remove one 4/32" screw with a Phillips 1 screwdriver. |
|---|