Alterações no passo nº 9
Edição por Jake Devincenzi —
- Antes
- Depois
- Sem alteração
Linhas do passo
| [* black] Hold the logic board down with one hand and use your other hand to lift the left fan up from its housing. There is a piece of black tape securing the left fan to the heat sink. Carefully peel this tape up from the heat sink as you lift the left fan up. | |
| [* icon_note] Place the left fan above the Airport card. It is not necessary to remove the fan from the computer entirely. | |
| [* black] Lift the right fan up and carefully peel up the tape securing the fan to the heat sink as you go. | |
| [* black] Remove the right fan from the computer. | |
| + | [* icon_note] If you leave the orange screws on, the heatsink/pipes come out effortlessly, still mounted onto the main board. That way the thermal connections are retained. |