Alterações no passo nº 12
Edição por Adonis Urick —
Edição aprovada por Adonis Urick
- Antes
- Depois
- Sem alteração
Linhas do passo
| + | [* black] You are ready to put it back into the back of the pot. Note the tab inside the metal pot backing. You'll have to put it back in the same alignment that it was in before disassembly. also the plastic tab on the black plastic piece will need to go to either side of the metal tab otherwise you won't be able to put the metal backing on. See next. |
|---|
Imagem 1
Nenhuma imagem anterior
Adicionado