Alterações no passo nº 2
Edição por Evan Noronha —
Edição aprovada por Evan Noronha
- Antes
- Depois
- Sem alteração
Linhas do passo
| + | [* black] Carefully place a suction cup halfway up the heated side. |
|---|---|
| + | [* black] Be sure the cup is completely flat on the screen to get a tight seal. |
| + | [* black] While holding the iPad down with one hand, pull up on the suction cup to slightly separate the front panel assembly from from the rear case. |
| + | [* icon_caution] Be careful to only lift the glass enough to insert an opening pick—any more and you risk cracking the glass. |