Alterações no passo nº 2
Edição por Philip Le Riche —
Edição aprovada por Philip Le Riche
- Antes
- Depois
- Sem alteração
Linhas do passo
| [title] Rear cover removal - 2 | |
| [* black] Using a nylon spudger, or with care a small flat screwdriver, ease the rear cover away from the main body of the iron on both sides, starting at the top near the cable entry. | |
| [* black] Once the rear cover starts to come away you can increase the gap created by inserting the spudger a little further down. | |
| - | [* black] Note the tab on the rear cover shown in the 3rd photo which was holding the rear cover in place. On reassembly this can't be re-inserted without lifting the top cover (see later). |
| + | [* black] Note the tab on the rear cover shown in the 3rd photo which was holding the rear cover in place. On reassembly this can't be re-inserted without lifting the top cover (see Step 7 later). |