Alterações no passo nº 7
Edição por Andrew Bookholt —
- Antes
- Depois
- Sem alteração
Linhas do passo
| [* black] Disconnect the hard drive cable from the hard drive using a spudger by gently loosening one side at a time. (Be careful not to pry to hard or you may bend the pins.) You may need to remove a piece of orange tape attaching the ribbon cable to the hard drive. | |
| [* icon_note] This is a bit tricky. If you bend the pins, do your best to straighten them using the hard drive cable as a guide. | |
| + | [* icon_note] If you are installing a new hard drive, we have an [guide|751|OS X install guide] to get you up and running. |