Histórico do passo nº 4 do guia Dell Latitude E6410 Screen Assembly Replacement

-	[* red] Remove the two 5mm ~~phillips~~ screws in the bottom right and the top left corners of the back panel.
-	[* orange] Remove the 3mm ~~phillips~~ screw that is near the bottom right corner.
-	[* yellow] Loosen the ~~phillips~~ screw that is near the center until the spring pops up, but do not remove it.
-	[* black] ~~Then detach~~ the back case panel by sliding it away from the ~~location of the battery~~ and ~~then lifting~~ out of place.
+	[* red] Remove the two 5mm Phillip's screws in the bottom right and the top left corners of the back panel.
+	[* orange] Remove the 3mm Phillip's screw that is near the bottom right corner.
+	[* yellow] Loosen the Phillip's screw that is near the center until the spring pops up, but do not remove it.
+	[* black] Detach the back case panel by sliding it away from the battery slot and lifting it out of place.
	[* icon_reminder] When reattaching the back panel slide it towards the location of the battery instead of away from it while also applying pressure downwards.