Alterações no passo nº 4
Edição por Alexander Merrick —
Edição aprovada por Alexander Merrick
- Antes
- Depois
- Sem alteração
Linhas do passo
| - | [* red] Remove the two 5mm phillips screws in the bottom right and the top left. |
|---|---|
| - | [* green] Remove the 3mm phillips screw that is near the bottom right. |
| + | [* red] Remove the two 5mm phillips screws in the bottom right and the top left corners of the back panel. |
| + | [* green] Remove the 3mm phillips screw that is near the bottom right corner. |
| [* orange] Loosen the phillips screw that is near the center until the spring pops up, but do not remove it. | |
| [* black] Then detach the back case panel by sliding it away the location of the battery and then lifting out of place. |