Alterações no passo nº 6
Edição por Brian Tsai —
Edição recusada por Evan Noronha
- Antes
- Depois
- Sem alteração
Linhas do passo
| [* red] Disconnect the LCD thermal sensor cable connector from its socket on the logic board. | |
| + | [* icon_caution] This connector is very difficult to disconnect, and the wires may may strip out of the connector while trying. You may wish to not disconnect this and instead have a helper swivel the screen out of the way while you remove the hard drive. There is enough flex in the cable to allow this, if you disconnect the other 3 cables. |
| [* icon_note] If your fan is spinning full speed after completion, check this connection or the hard drive's thermal sensor cable. |