Alterações no passo nº 1
Edição por Sean Croft —
Edição aprovada por Sean Croft
- Antes
- Depois
- Sem alteração
Linhas do passo
| + | [* black] On each side of each RAM card, there will be a thin strip of metal that is holding the chip down. Using tweezers or another thin tool, gently push these pins apart. |
|---|---|
| + | [* black] The first RAM card should pop up on its own. Gently remove this card, and look for the two strips of metal holding the bottom card down. |
| + | [* black] Push the pins apart just like for card one. Just like the first card, this one will pop up and you can remove it. |