Ir para o conteúdo principal

Alterações no passo nº 3

Edição por Brayden Mann

Edição aprovada por Brayden Mann

Antes
Depois
Sem alteração

Linhas do passo

-[* black] Remove the loudspeaker. In this step, you will need to use T5 tort screwdriver and #000 Phillips screwdriver, because there are two different kinds of screws on the back that must be loosed before the loud speaker can be removed.
+[* black] Use screwdriver from [product|IF145-022-1|54 Bit Driver Kit] in order to remove screws. Be sure to separate the screws to avoid confusion.