Alterações no passo nº 1
Edição por Andrew Bookholt —
- Antes
- Depois
- Sem alteração
Linhas do passo
| + | [* black] Use the flat end of a plastic opening tool to flip up the retaining flap on the headphone jack and front-facing camera ribbon cable ZIF socket. |
|---|---|
| + | [* icon_caution] Be sure you are prying up on the hinged retaining flap, ***not*** the socket itself. |
| + | [* black] Run a plastic opening tool underneath the headphone jack and front-facing camera cable to loosen the adhesive attaching the cable to the rear panel. |
| + | [* black] Pull the headphone jack and front-facing camera ribbon cable straight out of its socket on the logic board. |
Imagem 1
Nenhuma imagem anterior
Adicionado
Imagem 2
Nenhuma imagem anterior
Adicionado