Alterações no passo nº 9
Edição por Chelcee Schlichting —
Edição aprovada por Chelcee Schlichting
- Antes
- Depois
- Sem alteração
Linhas do passo
| [* black] Take the lock cylinder and both of the 2.5 inch mounting screws and insert them through the latch of the deadbolt. | |
| [* black] Then mount the key cylinder on the screws. | |
| - | [* black] After aligning the cylinder and the lock, use a Phillips screwdriver to tighten the mounting screws and secure the deadbolt to the frame. |
| + | [* black] After aligning the cylinder and the lock, use a Phillips screwdriver to tighten the 2.5 in mounting screws and secure the deadbolt to the frame. |
| [* icon_reminder] The cylinder should be mounted on the outside of the doorframe. |