Alterações no passo nº 2
Edição por Christina Crasto —
Edição aprovada por Christina Crasto
- Antes
- Depois
- Sem alteração
Linhas do passo
| - | [* red] Using J1 Phillips head screwdriver unscrew 6 screws. DO NOT REMOVE THEM. They will not come out until you take the entire fan out. |
|---|---|
| - | [* orange] Using J1 Phillips head screwdriver unscrew one 5mm screw from bottom of fan. |
| - | [* yellow] Using J1 Phillips head screwdriver unscrew three 7 mm screws from top corner of fan. |
| + | [* red] Use the #J1 Phillips head screwdriver to unscrew six #J1 Phillips head screws but do not remove the screws. |
| + | [* icon_caution] Do careful to not remove the screws until the entire fan is taken out. |
| + | [* orange] Use the #J1 Phillips head screwdriver to unscrew one 5mm #J1 Phillips head screw from the side of the fan closest to you. |
| + | [* yellow] Use the #J1 Phillips head screwdriver to unscrew three 7 mm #J1 screws from the top corner of fan. |