Alterações no passo nº 2
Edição por Trevor Gilmer —
Edição aprovada por Trevor Gilmer
- Antes
- Depois
- Sem alteração
Linhas do passo
| [* black] Once the battery is loose slowly lift it up so you can get to the terminals as seen in the next picture. | |
| [* red] Desolder the battery's connection terminals from the motherboard. | |
| [* icon_note] If you do not know how to desolder look at this [guide|750|soldering and desoldering guide] | |
| [* black] Remove the battery by pulling it out of the device. | |
| - | [* icon_caution] |
| + | [* icon_caution] In order to avoid damage to the device, the battery must be physically removed from the device before proceeding with any further repairs . Leaving a battery close to a device being worked on can be extremely hazardous. Leads can bump into the motherboard or into each other by accident causing damage to the device. |