Alterações no passo nº 4
Edição por Leonhard Bokowski —
Edição recusada por Adam O'Camb
- Antes
- Depois
- Sem alteração
Linhas do passo
| - | [* black] |
|---|---|
| - | [* icon_caution] ***Make sure |
| - | [* icon_note] Note: |
| + | [* black] After removing the rubber strip covering the ribbon cable under the display, you're now going to turn the contrast (the slider on the left) all the way up, and take your soldering iron and gently move it back and forth on the ribbon cable below the screen. |
| + | [* icon_caution] ***Make sure to move the soldering iron the whole time, because you might burn through the ribbon if you heat it up too long.*** |
| + | [* icon_note] Note: If you add a bit of solder to your iron, it might work better. |