Alterações no passo nº 3
Edição por Holly Butman —
Edição aprovada por Holly Butman
- Antes
- Depois
- Sem alteração
Linhas do passo
| - | [* black] Now place the new screw inside the new bracket and line up the holes with the base of the screw |
|---|---|
| - | [* black] Make sure the outer facing part of the bracket doesn't have the indention in it that's meant for the TP roll to be put inside! |
| - | [* black] Carefully hold the screw in place and drill it into the wall or cupboard |
| - | [* black] Repeat this for the top and bottom screws on both left and right bracket base (4 times total) |
| + | [* black] Place the new screw inside the new bracket and line up the mark with the base of the screw. |
| + | [* icon_reminder] Make sure that the indentation for the toilet paper holder is facing in. |
| + | [* black] Repeat this for the top and bottom screws on both the left and right bracket bases (4 times total). |