Alterações no passo nº 1
Edição por hello —
- Antes
- Depois
- Sem alteração
Linhas do passo
| - | [* black] Remove all of the screws that hold the back plate in place |
|---|---|
| - | [* red] Unscrew the 4mm screw that is directly to the right of the viewfinder |
| - | [* black] On the base |
| - | [* red] Unscrew the 3mm screw in the top left corner |
| - | [* orange] Unscrew all four 3mm screws under the battery cover |
| - | [* green] Unscrew the 3mm screw on the right side panel |
| - | [* black] Unscrew the two 2mm screws on the left side panel |
| - | [* icon_note] The bullets apply to the three pictures on the step |
| + | [* black] Remove all of the screws that hold the back plate in place. |
| + | [* red] Unscrew the 4mm screw that is directly to the right of the viewfinder. |
| + | [* black] On the base, |
| + | [* red] Unscrew the 3mm screw in the top left corner. |
| + | [* orange] Unscrew all four 3mm screws under the battery cover. |
| + | [* green] Unscrew the 3mm screw on the right side panel. |
| + | [* black] Unscrew the two 2mm screws on the left side panel. |
| + | [* icon_note] The bullets apply to the three pictures on the step. |