Alterações no passo nº 7
Edição por mayer —
- Antes
- Depois
- Sem alteração
Linhas do passo
| [* black] Remove the following 2 screws from the right hinge mount: | |
| [* red] One 6 mm Phillips on the left side of the hinge mount. | |
| [* orange] One 10 mm Phillips on the right side of the hinge mount. | |
| [* black] For Santa Rosa/Penryn models, see second picture and remove: | |
| - | [* red] One |
| - | [* orange] One |
| + | [* red] One 3 mm smalller diameter Phillips on the far left. |
| + | [* orange] One 5.2 mm larger diameter 4.2 mm head Phillips in the middle. |
| [* yellow] One 10 mm Phillips from the far right. | |
| - | [* black] Lift the right hinge mount out of the computer. |
| + | [* black] Lift the right hinge mount with the small plastic piece out of the computer. |