Alterações no passo nº 1
Edição por Andrew Bookholt —
- Antes
- Depois
- Sem alteração
Linhas do passo
| + | [* black] Remove the following 3 screws: |
|---|---|
| + | [* red] Two 3 mm Phillips near the right speaker. |
| + | [* orange] One 6 mm Phillips threaded through a hole in a plastic finger above the subwoofer. |
| + | [* icon_reminder] Be careful not to over-tighten the screw above the subwoofer too tight or the plastic could crack. |
| + | [* icon_note] Santa Rosa and Penryn MacBooks do not have a C-Channel. If you are disassembling either of these models, remove only the 3 mm Phillips screw from the right speaker and skip step 26. |
Imagem 1
Nenhuma imagem anterior
Adicionado