Alterações neste passo
Edição por Zachary Grounds —
Edição aprovada por Zachary Grounds
- Antes
- Depois
- Sem alteração
Linhas do passo
| - | [* black] Begin the teardown process by removing the 5 screws attaching the plastic case to the base of the device. |
|---|---|
| - | [* black] These are Phillips screws. Two can be viewed from the bottom and three are hidden in the 'feet' of the sharpener. |
| - | [* black] Access the screws by removing the rubber feet, gently lift up on the edge of the rubber, to expose a thin hole. A thin screwdriver is needed to reach the screw. |
| + | [* black] Follow our guide for [guide|51752|disassembling the case of the device.] |