Alterações no passo nº 2
Edição por Michael Clark —
Edição aprovada por Michael Clark
- Antes
- Depois
- Sem alteração
Linhas do passo
| [* black] Use the spudger to pry up the board from the case. | |
| [* icon_caution] Insert the spudger a minimum distance beneath the board as there are components below. | |
| [* black] Wiggle the exposed side of the board from each end until it comes free. | |
| - | [* icon_caution] Use proper electrostatic discharge safety when removing and handling the board. |
| + | [* icon_caution] Use proper [https://en.wikipedia.org/wiki/Electrostatic_discharge|electrostatic discharge] safety when removing and handling the board. |