Alterações no passo nº 2
Edição por Andrew Bookholt —
- Antes
- Depois
- Sem alteração
Linhas do passo
| - | [* black] Insert wisdom here. |
|---|---|
| + | [* black] Carefully remove the heat sink from the processor. |
| + | [* icon_note] If the heat sink seems to be stuck, it may be helpful to gently pry it off the processor with a plastic spudger. Be careful not to break any surface mount components on the processor while prying. |
| + | [* icon_caution] Be sure to clean off the old thermal paste and apply a new layer before you reinstall the heat sink. We have a [guide|744|guide] that makes it easy. |