Alterações no passo nº 7
Edição por Bruno Cunha —
- Antes
- Depois
- Sem alteração
Linhas do passo
| [* icon_caution] There's a trackpad and keyboard ribbon connecting the upper case to the logic board, so don't pull the upper case off entirely just yet. | |
| - | [* black] Starting near the display and working around to the front of the computer, pry up on the upper case. |
| + | [* black] Starting near the display and working around to the front of the computer, pry up on the upper case. A [http://www.ifixit.com/Tools/Plastic-Opening-Tools/IF145-000|plastic opening tool] or a medium hard guitar pick may help you to do this. |
| [* icon_note] The upper case is likely to stick at the connection above the optical drive. If this is the case first free all other sides, then proceed to pull upward on the upper case from either side of the optical drive opening. |