Alterações no passo nº 12
Edição por Matt Bryan —
Edição aprovada por Matt Bryan
- Antes
- Depois
- Sem alteração
Linhas do passo
| [* black] Adjust the tension in the springs in the back of the guitar by using your screwdriver to tighten or loosen the screws pulling on the springs. | |
| - | [* icon_caution] |
| - | [* icon_caution] |
| + | [* icon_caution] It shouldn't take too much to adjust the tension, maybe half a turn or so for each screw. |
| + | [* icon_caution] Be absolutely sure to turn both screws (if more than one exist) the same amount. |