Alterações no passo nº 6
Edição por Adam O'Camb —
Edição aprovada por Adam O'Camb
- Antes
- Depois
- Sem alteração
Linhas do passo
| [* black] Insert an opening pick about 0.5 inches (~12mm) under the opposite bottom corner of the display. | |
| - | [* icon_caution] Keep a close eye on the button's ribbon cable as you insert the pick. The cable is fragile and very easy to tear. If the pick is hard to insert or the cable starts to stretch, apply more heat. |
| + | [* icon_caution] Keep a close eye on the button's ribbon cable as you insert the pick. The cable is fragile and very easy to tear. If the pick is hard to insert or the cable starts to stretch, apply more heat. |
| [* black] Leave the pick under the display to prevent the button from re-adhering to the display. |