Alterações no passo nº 3
Edição por Evan Noronha —
Edição aprovada por Evan Noronha
- Antes
- Depois
- Sem alteração
Linhas do passo
| [* black] Orient the phone so that you're facing the back of the LCD. | |
| [* black] Insert an opening pick between the display assembly and display frame. | |
| [* icon_caution] Be sure to not angle the pick downward, as this can cause the pick to separate the digitizer from the LCD. Rather, keep the pick as level as possible to insert it between the plastic frame and the LCD. | |
| + | [* icon_note] To ensure you're not separating the display assembly, flip the phone over and check if you can see the pick through the glass. If so, pull it out carefully and reinsert it flatter angle. |