Pular para o conteúdo principal

Alterações no passo #1

Edição por Dante Mazzanti

Edição aprovada por Dante Mazzanti

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* black] Insert a plastic opening pick between the case and the battery.
[* icon_caution] Be careful to keep the pick as flat as possible to avoid bending the battery, which may damage it and cause it to release dangerous chemicals.
[* black] Push the pick further in to separate the battery from the phone.
[* icon_note] If the battery is too strongly adhered for the opening pick, place a warm iOpener over the battery to loosen the adhesive.
[* icon_caution] '''Do not''' pry against the logic board or you may damage the phone.