| - | [* red] Following the procedure from steps 19 & 20, open and disconnect the ZIF cable close to the center of the circuit board. |
|---|
| - | [* icon_note] The front camera ZIF connector latch is the white part, not the black part as previous ZIF connector latches have been. |
|---|
| + | [* red] Following the procedure from steps 19 & 20, open and disconnect the ZIF cable closer to the edge of the logic board. |
|---|
| + | [* icon_note] The front camera ZIF connector latch on the cable side instead of being opposite the cable. It is still the white lever. |
|---|