Alterações no passo nº 1
Edição por Chad Carlson —
Edição aprovada por Chad Carlson
- Antes
- Depois
- Sem alteração
Linhas do passo
| - | [* black] Using the #000 Phillips screwdriver, remove the three ______ screws that holds down the metal plate. Two are under the lens assembly and the third is in the opposite corner. |
|---|---|
| - | [* black] Using the spudger, pry off the corresponding ribbon cable from the motherboard. It should come off quite easily. |
| - | [* black] The microSD/aceessory board is ready to come flying off. |
| + | [* black] Using the #000 Phillips screwdriver, remove the three screws that hold down the metal plate. Two are under the lens assembly and the third is in the opposite corner. |