Alterações no passo nº 4
Edição por wahooza —
Edição aprovada por Jake Devincenzi
- Antes
- Depois
- Sem alteração
Linhas do passo
| - | [* blue] Use a spudger or a flathead screwdriver and carefully pry out the first flash cable from the bottom of the cable. |
|---|---|
| + | [* blue] Use a spudger or a flathead screwdriver and carefully pry out the first flash cable from the bottom of the cable. The white 2 prong power cable pops UP (use spudger below red/black insertion and put upward pressure). For the yellow one, apply pressure horizontally. |
| [* green] Next use a spudger or a flathead screwdriver and carefully pry out the second flash cable. |