Alterações no passo nº 4
Edição por Sean Wright —
Edição aprovada por Sean Wright
- Antes
- Depois
- Sem alteração
Linhas do passo
| [* black] ***Circuit Board Removal***: | |
| - | [* black] Lift the black separator plate to reveal the circuit board. |
| + | [* black] Separate the bottom portion of the enclosure further by pulling vertically on the red portion of the bottom of the enclosure . |
| + | [* black] Once this part has been separated, gently set it aside along with the resonator section. Continue to make sure that there is no tension on the red and black wires coming from the circuit board. |
| [* black] Remove the circuit board by lifting and sliding the board by the back end, opposite to the LED indicator, away from the LED indicator. |