Alterações no passo nº 2
Edição por Thomas Napert —
Edição aprovada por Thomas Napert
- Antes
- Depois
- Sem alteração
Linhas do passo
| - | [* black] Remove the grinding wheel with your hands turning it counter clockwise. |
|---|---|
| + | [* black] Remove your grinding/cutting tool by simply pulling it off the spindle. |
| + | [* orange] Next remove the disc flange (a.k.a a spacer) by pulling it off of the back end of the spindle. |
| + | [* icon_note] The disc flange has two small raised edges on its back side. These ridges need to be aligned with the two flat faces at the back of the spindle lock when reassembled. This will ensure a safe, snug fit for your grinding blades. |