Alterações no passo nº 1
Edição por Sera Moore —
Edição aprovada por Sera Moore
- Antes
- Depois
- Sem alteração
Linhas do passo
| - | [* red] Using PH#00 screw driver, remove two 0. |
|---|---|
| - | [* icon_note] The two Phillips head screws are located on the bottom face of the device near the power and volume controls. |
| + | [* red] Using PH#00 screw driver, remove two 0.145 inch Phillips head screws. |
| + | [* icon_note] The two Phillips head screws are located on the bottom face of the device, near the power and volume controls. |