Pular para o conteúdo principal

Alterações no passo #5

Edição por Ron Davis

Edição aprovada por Ron Davis

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* red] Remove the four 3.9mm3.9 mm Phillips #1 screws from the hard drive casing using Phillips #1 screwdrivercasing.
[* icon_note] There are 2two screws on the oppositeeach side of the casingcasing.
[* red] Remove the four 3.9mm3.9 mm Phillips #1 screws from the hard drive casing using Phillips #1 screwdrivercasing.
[* icon_note] There are 2two screws on the oppositeeach side of the casingcasing.