Ir para o conteúdo principal

Alterações no passo nº 1

Edição por Morgan

Edição aprovada por Morgan

Antes
Depois
Sem alteração

Linhas do passo

-[* red] Press gently on SD card and slid up to remove.
-[* orange] Press gently on SIM card and slid left to remove.
-[* yellow] Remove the four 8.00mm Torx-6 screws from the back of the phone.
+[* red] If there is an SD card, press gently on the card and slide up to remove.
+[* orange] If there is a SIM card, press gently on the card and slide left to remove.
+[* yellow] Use the Torx-6 screwdriver head from the 26 Bit Driver Kit to remove the four 8.00mm screws from the back of the phone.