Alterações no passo nº 8
Edição por Andrew Bookholt —
- Antes
- Depois
- Sem alteração
Linhas do passo
| [* black] Slightly tilt the steel mid plane to dislodge it from the rear case. | |
| - | [* black] Lift the steel mid plane up off the rear case and peel the piece of copper tape glued to the rear facing camera. |
| + | [* icon_caution] Be careful not to tear the piece of copper tape connecting the rear-facing camera to the steel mid plane. |
| + | [* black] Lift the steel mid plane up off the rear case and peel off the piece of copper tape stuck to the rear facing camera. |