Ir para o conteúdo principal

Alterações no passo #3

Edição por bushing

Aguardando aprovação

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* black] The speaker is only connected to the circuitmain board viawith two soldered wires. Replacing is fairly simple.
[* black] All that need be done is removeTo replace the speaker, desolder the wires from the old speakerone and solder in a new one. Make sure that the correct speaker is used(Model # and make are printedthem on to the outside). As only a certain amountnew speaker. The polarity of electricitythe wires is allocated for usenot important, so it's okay if you swap them.
[* black] The speaker is only connected to the circuitmain board viawith two soldered wires. Replacing is fairly simple.
[* black] All that need be done is removeTo replace the speaker, desolder the wires from the old speakerone and solder in a new one. Make sure that the correct speaker is used(Model # and make are printedthem on to the outside). As only a certain amountnew speaker. The polarity of electricitythe wires is allocated for usenot important, so it's okay if you swap them.