Alterações no passo nº 1
Edição por Kaylan Naicker —
Edição aprovada por Kaylan Naicker
- Antes
- Depois
- Sem alteração
Linhas do passo
| [title] Removing the 1.75" Axle Bolt | |
| - | [* |
| - | [* |
| + | [* black] Orient the scooter so that the front wheel is facing you. Observe the right and left side of the wheel. Remember which is which throughout the guide. |
| + | [* black] Using an Allen wrench, unscrew the axle bolt slowly from the right side while applying a constant pressure with your hand on the left side of the bearing. |
| [* icon_note] If the left side of the bolt turns while you unscrew the right side, you will need to use a second Allen wrench to prevent it from moving | |
| [* icon_note] If the bolt does not move at all, or moves very little, try applying a lubricant on as much of the screw as possible and try again in 5 minutes. | |
| - | [* |
| + | [* black] Carefully pull apart the bolt and bearing from either side of the wheel. |